Cảm biến áp suất IFM model PI1789

 

Cảm biến áp suất IFM model PI1789

Thiết kế bằng thép không gỉ chắc chắn cho các yêu cầu của ngành công nghiệp thực phẩm và đồ uống

Chịu được làm sạch áp suất cao với các chất tẩy rửa mạnh

Khả năng chịu nhiệt độ cao và xếp hạng bảo vệ cao

Đầu ra tương tự và chuyển mạch có thể lập trình.

Các thông số và ứng dụng khi dùng Cảm biến áp suất IFM model PI1789

Product characteristics
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	-5...100 mbar -2...40.15 inH2O -0.5...10 kPa
Process connection	threaded connection G 1 external thread Aseptoflex Vario
Application
Special feature	Gold-plated contacts
Application	flush mountable for the food and beverage industry
Media	viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]	-25...150
Min. bursting pressure	30000 mbar 12044 inH2O 3000 kPa
Pressure rating	4000 mbar 1606 inH2O 400 kPa
Vacuum resistance [mbar]	-1000
Type of pressure	relative pressure; vacuum
No dead space	yes
Electrical data
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Integrated watchdog	yes
2-wire
Operating voltage [V]	20...30 DC
Current consumption [mA]	3.5...21.5
Power-on delay time [s]	< 1
3-wire
Operating voltage [V]	18...30 DC
Current consumption [mA]	5...45; (430 bei max. Laststrom)
Power-on delay time [s]	< 0.5
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs	2
Output signal	switching signal; analogue signal; IO-Link
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Number of analogue outputs	1
Analogue current output [mA]	4...20, invertible; (scalable)
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
2-wire
Max. load [Ω]	300
3-wire
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	100
Switching frequency DC [Hz]	125
Max. load [Ω]	(Ub - 10 V) / 21,5 mA; 650 Ω (Ub = 24 V)
Measuring/setting range
Measuring range	-5...100 mbar -2...40.15 inH2O -0.5...10 kPa
Set point SP	-4.9...100 mbar -1.95...40.15 inH2O -0.49...10 kPa
Reset point rP	-5...99.9 mbar -2.01...40.09 inH2O -0.5...9.99 kPa
Analogue start point	-5...80 mbar -2.01...32.12 inH2O -0.5...8 kPa
Analogue end point	15...100 mbar 6.02...40.15 inH2O 1.5...10 kPa
Min. difference between SP and rP	0.2 mbar 0.06 inH2O 0.02 kPa
In steps of	0.1 mbar 0.01 inH2O 0.01 kPa
Factory setting	SP1 =25 mbar rP1 = 23 mbar SP2 = 75 mbar rP2 = 73 mbar ASP = 0 mbar AEP = 100 mbar dAP = 2.00 s dAA =2.00 s
Temperature monitoring
Measuring range	-25...150 °C -13...302 °F
Accuracy / deviations
Notes on the accuracy / deviation	for further details see section Diagrams and graphs
Switch point accuracy [% of the span]	< ± 0,5; (DIN EN IEC 62828-1; Turn down 1:1)
Repeatability [% of the span]	< ± 0,2; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]	< ± 0,5; (DIN IEC EN 62828-1 incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1)
Linearity deviation [% of the span]	< ± 0,25; (Turn down 1:1)
Hysteresis deviation [% of the span]	< ± 0,2; (Turn down 1:1)
Long-term stability [% of the span]	< ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature range	Temperature range total deviation -25...15 °C Characteristics deviation ± 0,15 % der Spanne / 10 K 15...80 °C Characteristics deviation 80...150 °C Characteristics deviation ± 0,2 % der Spanne / 10 K
Temperature monitoring
Accuracy [K]	± 2,5+ (0,08 x ( Umgebungstemperatur - Mediumtemperatur ))
Repeatability [K]	± 0,2
Resolution [K]	0.2
Response times
Damping process value dAP [s]	0...99.99
Damping for the analogue output dAA [s]	0...99.99
2-wire
Step response time analogue output [ms]	30
3-wire
Min. response time of switching output (dAP) [ms]	3
Step response time analogue output [ms]	7
Temperature monitoring
Dynamic response T05 / T09 [s]	< 35 / < 135; (DIN EN 60751 water ; > 0,9 m/s)
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A)
SIO mode	yes
Required master port type	A
Min. process cycle time [ms]	5.6
IO-Link resolution pressure [mbar]	0.005
IO-Link resolution temperature [K]	0.2
IO-Link process data (cyclical)	function bit length pressure 32 temperature 32 device status 4 binary switching information 2
IO-Link functions (acyclical)	application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter
Supported DeviceIDs	Type of operation DeviceID Default 1158 d
Operating conditions
Ambient temperature [°C]	-25...80
Storage temperature [°C]	-40...100
Protection	IP 67; IP 68; IP 69K
Tests / approvals
EMC	DIN EN 61326-1
Shock resistance	DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 20 g (10...2000 Hz)
MTTF [years]	214
Note on approval	factory certificate available as download at www.factory-certificate.ifm
Mechanical data
Weight [g]	356
Materials	stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA
Materials (wetted parts)	ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE
Min. pressure cycles	100 million
Tightening torque [Nm]	35
Process connection	threaded connection G 1 external thread Aseptoflex Vario
Displays / operating elements
Display	Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit
Display unit	mbar; kPa; inH2O
Remarks
Pack quantity	1 pcs.
Electrical connection
Connection	Connector: 1 x M12; coding: A; Contacts: gold-plated

 

Công ty TNHH Thiết Bị Vật Tư Gia Phát chuyên cung cấp các thiết bị , linh kiện điện tử : van, cảm biến, xy lanh... của các hãng trên thế giới.

Mọi chi tiết về sản phẩm, quý khách vui lòng liên hệ với chúng tôi theo thông tin sau:

CÔNG TY TNHH THIẾT BỊ VẬT TƯ GIA PHÁT

Địa chỉ:  1331/15/16A Lê Đức Thọ, Phường 14, Quận Gò Vấp, Tp.Hồ Chí Minh, Việt Nam

Website: dailythietbinhanong.com

Email: thietbinhanonggiaphat@gmail.com/Sales1@dailythietbinhanong.com

Hotline: 0932 606 722